Can you frame in winter in Randolph?

Yes. Framing is one of the few trades that continues through New England winters — lumber isn’t temperature-sensitive the way concrete or paint is. We plan for weather protection and shorter daylight, and we cover the deck to keep snow out of the structure.

What is engineered lumber and do I need it?

LVL and PSL are manufactured from bonded wood veneers or strands, so they’re stronger and far straighter than sawn lumber. You need it for long clear spans, load-bearing wall removals, and floors you don’t want to bounce. For standard walls, dimensional lumber is fine and cheaper.

How do you tie new framing into an older Randolph home?

Older homes have settled, so we start by checking what’s actually level and square. We re-square where needed, sister weakened joists, and set the new structure to the corrected reference — that’s what stops the cracked-corner, sloped-floor look on additions.

What is a load-bearing wall, and can it be removed?

A load-bearing wall carries weight from the floor, roof, or wall above it down to the foundation. It can be removed, but only if the load is transferred to a properly sized beam — typically LVL or PSL — with posts and footings sized to carry it. Removing one without that transfer is how ceilings sag and floors bounce. We size the beam and, where required, have it stamped by an engineer.

Will framing be inspected before the walls are closed up?

Yes, and this is the inspection that matters most. A rough framing inspection happens after framing, and typically after rough plumbing, electrical, and HVAC are in but before insulation and drywall. The inspector checks structural members, connections, fire blocking, and notching or boring of studs and joists. Nothing gets covered until it passes.

Do I need a building permit to frame an addition in Massachusetts?

Yes. Any new structure, addition, or structural alteration requires a building permit under 780 CMR, issued by the building department in the town where the work happens. Permit fees and review times are set locally, so they differ from town to town. We pull the permit and coordinate the framing, insulation, and final inspections as part of the job.

How much does framing services cost in Randolph, MA?

Framing Services pricing in Randolph depends on the size, scope, materials, and structural complexity of your specific project. RS Development Group provides a free, written, itemized estimate after an on-site walkthrough — call (774) 512-3176 to schedule.

Do you offer framing services near me in Randolph?

Yes. RS Development Group provides framing services throughout Randolph, the rest of Norfolk County, and the surrounding South Shore area of Massachusetts. We’re a licensed, insured contractor (MA HIC #216507) based in Marlborough, MA.

What areas near Randolph do you cover?

Beyond Randolph, we regularly work throughout the South Shore area of Norfolk County — including Milton, Canton, Stoughton. Call (774) 512-3176 and we’ll confirm we cover your street.

Are you licensed and insured for framing services in Randolph?

Yes — fully licensed (MA HIC #216507) with general liability and workers’ compensation insurance. We pull all permits and build to code on every Randolph project.

How soon can you start my Randolph framing services project?

Typical timeline is 1-2 weeks from estimate to site visit, then 2-6 weeks to start depending on the permit timeline. For emergency repairs we offer same-day or next-day response across the South Shore area. Call (774) 512-3176.

Framing Services · Randolph, MA

Framing Services in Randolph, MA

Framing is the skeleton of every Randolph home, and we frame it to outlast the mortgage. From our South Shore coverage across Norfolk County, Randolph framing services projects — and jobs in nearby Milton — are part of our regular route. Get your free Randolph framing services estimate today — call (774) 512-3176.

Call (774) 512-3176 Free Estimate

Get Your Free Quote

Request Free Estimate

Or call (774) 512-3176

[aria-label="Open the free estimate form"]{display:none!important}

Get Your Free Quote

Call (774) 512-3176 or open our estimate form.

Request Free Estimate

Local Expertise

Framing Services Challenges in Randolph

Real problems Randolph homeowners face — and exactly how RS Development Group solves them.

The problem

Bouncy, sagging floors in older Randolph homes usually trace back to undersized or over-spanned joists.

Our solution

We sister or replace joists and add mid-span support so floors feel solid underfoot again.

The problem

Additions that don’t tie cleanly into existing Randolph framing crack, sag, and leak over time.

Our solution

We integrate new framing into your existing structure so the addition is seamless and solid.

The problem

Rot and insect damage in Randolph sill plates and rim joists quietly compromise the whole structure.

Our solution

We cut out and replace compromised framing members, correct the moisture source, and rebuild to code.

Professional Framing Services for Randolph Homes

Framing is the backbone of every building project, and getting it right is the difference between a home that lasts for generations and one that develops costly problems down the road. RS Development Group specializes in structural framing for new construction, additions, and renovations across Massachusetts. Our master framers bring precision, building-code expertise, and an obsessive attention to detail to every job.

Call (774) 512-3176

What You Get in Randolph

Engineered LVL/PSL beams for long, clear spans
Permits pulled and built to MA State Building Code (780 CMR)
Seamless tie-ins to existing structure
Square, plumb, and inspection-ready framing
Correctly sized headers and load paths on every opening
Local crews serving Randolph and the rest of Norfolk County

What We Install for Framing Services in Randolph

Dimensional lumberKiln-dried spruce/fir for standard walls, floors and roofs.
Engineered LVL & PSL beamsLaminated veneer and parallel strand lumber for long clear spans and load-bearing changes.
Engineered I-joistsStiffer, quieter floor systems with less bounce than sawn joists.
Steel connectors & hangersSimpson-style hardware at every hanger, strap and hold-down, sized to the load.

Code & Permits in Randolph, MA

Built to the Massachusetts State Building Code (780 CMR) with permits pulled through your local building department.
Headers and beams sized to the span and load path, not guessed — engineered where required.
Framing inspection scheduled before insulation or drywall closes the walls.
Fire blocking, hurricane ties and shear connections installed where code requires.

What Drives Framing Services Cost in Randolph

We don’t quote framing services over the phone, because these are the factors that actually change the number on a Randolph project:

Square footage and number of stories
Structural complexity — rooflines, clear spans, cathedral ceilings
Dimensional lumber vs engineered LVL/PSL
Condition of existing framing (re-squaring, sistering, rot repair)
Permit timeline in your town

How Long It Takes

A typical addition or garage frame goes up in 1–3 weeks once permits are issued; a full new-home frame usually runs 3–6 weeks depending on size and weather.

Every Randolph estimate is free, written and itemised after an on-site walkthrough — so you see exactly what you’re paying for.

Call (774) 512-3176

How It Works

Our Framing Services Process

Simple, transparent, and stress-free from first call to final walkthrough.

Free Consultation

Call us or fill out our form. We’ll discuss your project needs and schedule a site visit at your convenience.

Detailed Estimate

We provide a comprehensive written estimate with transparent pricing. No hidden fees, no surprises.

Expert Construction

Our skilled team executes your project with precision, keeping you informed every step of the way.

Final Walkthrough

We walk through the completed project together, ensuring everything meets your expectations.

Portfolio

Recent Framing Services Projects

Swipe to see more →

Answers

Framing Services in Randolph — FAQ

We trace the load path from the roof down to the foundation, calculate the tributary load, and specify an LVL or PSL beam (with an engineer’s stamp where required) plus the posts and footings to carry it. Guessing the beam is how floors sag and drywall cracks later.

Testimonials

What Randolph Homeowners Say

5 out of 5 from 27 reviews on our Google Business Profile.

“Wounderful team! Realible and knowledgeable.”

— Olga ShevyakovaMay 2025

“Great carpenters, honest and hardworking. They offer a great quality work.”

— AlpeMay 2025

Loading…

Permitting & Code in Randolph

Randolph Building Department

Building Department

41 South Main Street (Second Floor), Randolph, MA 02368
781-961-0921
Online permit portal

Verified 2026-07-20 · RS Development Group pulls permits on your behalf.

Design ground snow load in Randolph

35 psf

At 35 psf this is among the lower design snow loads in the state, reflecting the milder coastal band. It is the starting point for sizing rafters, ceiling joists, and headers on any roof or addition here — the code requires the design roof load to be the greater of the value calculated from this figure or the minimum listed for the town, so we run the numbers for your specific structure rather than working from the table alone.

Source: 780 CMR 51.00 Table 301.2(2) · checked 2026-07-20

Rogerio Alves

Founder & Lead Contractor

Call (774) 512-3176

About RS Development Group

A Marlborough Contractor Built on Structural Expertise

Founded in 2008 by Rogerio Alves, RS Development Group has grown from a specialist framing crew into a full-service general contractor serving 109 cities and towns across Massachusetts. We're proud to bring that same craftsmanship to Randolph and the South Shore area.

What sets us apart is where we started: structural framing. Because we understand how a home is built from the skeleton out, every roof, addition, deck, siding job, and remodel we take on is handled with a structural awareness most contractors simply don’t have — which means fewer surprises, cleaner tie-ins, and work that lasts.

We’re fully licensed (MA HIC #216507) and insured, and we back every job with honest, written pricing and a schedule we keep. That’s how we’ve earned a perfect 5-star rating from 27 homeowners across the region.

Fully licensed — MA HIC #216507
General liability & workers’ compensation insured
Family-owned and operated since 2008
Perfect 5-star rating across 27 verified reviews
Free, written, itemized estimates — no surprises
Every project built to code and finished on schedule

Since 2008

Serving Massachusetts

5★

27 Verified Reviews

109

Massachusetts Cities & Towns Served

Licensed

MA HIC #216507

Other Services in Randolph

General Contractor Deck Construction Home Remodeling Siding Installation Roofing Services Home Additions

Framing Services Near Randolph

Weymouth, MA Milton, MA Canton, MA Stoughton, MA Sharon, MA Walpole, MA

Get Your Free Framing Services Estimate in Randolph

Licensed, insured, and 5-star rated. No obligation.

Call (774) 512-3176 Free Estimate — No Obligation