Hardie or vinyl for my Arlington home?

Vinyl is the best value and genuinely low maintenance. Hardie costs more but resists rot, fire and pests, holds colour longer, and reads as higher-end at resale. We’ll price both for your actual elevations so you’re comparing real numbers, not brochures.

What’s behind the siding and why does it matter?

A weather-resistive barrier (house wrap) plus flashing at every opening. Siding is a rain screen, not a seal — some water always gets behind it. The barrier is what carries that water back out. Skipping or lapping it wrong is the single most common cause of rotted sheathing.

Can you side just one elevation?

We can, and sometimes it makes sense after storm damage. But partial jobs often show — colour and profile rarely match aged siding exactly. Where budget allows, doing full elevations gives a uniform result that actually adds resale value.

How long does a siding replacement take?

A typical single-family home runs one to two weeks depending on size, siding type, and how much sheathing repair we find once the old cladding is off. We wrap and protect the exposed walls at the end of each day so the house is never left open to weather.

What is the difference between primed and pre-finished fiber cement?

Primed board is painted on site after installation, which gives you unlimited color choice but depends on weather and site conditions for a good finish. Pre-finished board (such as ColorPlus) arrives with a factory-baked finish that is far more uniform and durable, and carries its own finish warranty. Touch-ups on cut ends are handled with matching factory paint.

How important is flashing around windows and doors?

It is the single most important detail in a siding job. Most water intrusion we open up is not through the siding — it is through unflashed or poorly flashed openings. Head flashing, sill pans, and correctly lapped weather barrier are what keep water out; the siding is only the first shed layer.

How much does siding installation cost in Arlington, MA?

Siding Installation pricing in Arlington depends on the size, scope, materials, and structural complexity of your specific project. RS Development Group provides a free, written, itemized estimate after an on-site walkthrough — call (774) 512-3176 to schedule.

Do you offer siding installation near me in Arlington?

Yes. RS Development Group provides siding installation throughout Arlington, the rest of Middlesex County, and the surrounding Greater Boston area of Massachusetts. We’re a licensed, insured contractor (MA HIC #216507) based in Marlborough, MA.

What areas near Arlington do you cover?

Beyond Arlington, we regularly work throughout the Greater Boston area of Middlesex County — including Woburn, Winchester, Belmont. Call (774) 512-3176 and we’ll confirm we cover your street.

Are you licensed and insured for siding installation in Arlington?

Yes — fully licensed (MA HIC #216507) with general liability and workers’ compensation insurance. We pull all permits and build to code on every Arlington project.

How soon can you start my Arlington siding installation project?

Typical timeline is 1-2 weeks from estimate to site visit, then 2-6 weeks to start depending on the permit timeline. For emergency repairs we offer same-day or next-day response across the Greater Boston area. Call (774) 512-3176.

Siding Installation · Arlington, MA

Siding Installation in Arlington, MA

Behind good siding is a proper drainage plane — and that’s the part most Arlington installers rush. We don’t. We bring siding installation to Arlington homeowners across Middlesex County's Greater Boston area, including nearby Woburn. Licensed & insured (MA HIC #216507) and serving the Greater Boston area. Call (774) 512-3176 for your Arlington estimate.

Call (774) 512-3176 Free Estimate

Get Your Free Quote

Request Free Estimate

Or call (774) 512-3176

[aria-label="Open the free estimate form"]{display:none!important}

Get Your Free Quote

Call (774) 512-3176 or open our estimate form.

Request Free Estimate

Local Expertise

Siding Installation Challenges in Arlington

Real problems Arlington homeowners face — and exactly how RS Development Group solves them.

The problem

Woodpeckers, carpenter ants, and rot target soft, aging siding on Arlington homes.

Our solution

Fiber cement is rot-, pest-, and fire-resistant — we install it tight and detailed so nothing gets in.

The problem

Peeling paint and constant repainting make wood-sided Arlington homes a maintenance treadmill.

Our solution

We switch you to ColorPlus fiber cement or quality vinyl that holds its color for years, not seasons.

The problem

Siding installed tight against Arlington walls with no drainage plane traps moisture and rots the sheathing.

Our solution

We install over proper house wrap so any water that gets behind the siding can drain and dry.

Professional Siding Installation for Arlington Homes

New siding protects your home from New England weather and dramatically improves curb appeal. RS Development Group installs vinyl, fiber cement (James Hardie), wood, cedar shingle, and engineered wood siding — always with proper insulation and moisture barriers so your home stays dry and energy-efficient for decades.

Call (774) 512-3176

What You Get in Arlington

James Hardie fiber cement & quality vinyl options
Proper house wrap and flashing for a dry wall system
Insulated, energy-efficient installation
Storm-damage siding repair & replacement
Correctly integrated window and door flashing
Familiar with Greater Boston conditions and Massachusetts building code

What We Install for Siding Installation in Arlington

James Hardie fiber cementRot-, fire- and pest-resistant with a factory ColorPlus finish that holds colour for years.
Insulated & standard vinylBest value, low maintenance, wide colour and profile range.
Cedar clapboard & shingleThe classic New England look, installed with proper back-priming and exposure.
House wrap & flashingThe drainage plane behind the siding — the part most installers rush and the part that keeps walls dry.

Code & Permits in Arlington, MA

Weather-resistive barrier installed and lapped correctly so water drains out, not in.
Window and door openings flashed and integrated with the house wrap.
Fastening pattern and clearances per manufacturer spec — required to keep the warranty valid.
Permit pulled where your town requires it for full re-siding.

What Drives Siding Installation Cost in Arlington

We don’t quote siding installation over the phone, because these are the factors that actually change the number on a Arlington project:

Wall square footage and number of stories
Material — vinyl vs fiber cement vs cedar
Rotted sheathing found after tear-off
Trim, corners, and window/door wrapping detail
Added insulation or rain-screen furring

How Long It Takes

A typical single-family re-side takes 1–2 weeks; fiber cement and cedar run longer than vinyl because of cutting, fastening and finish detail.

Every Arlington estimate is free, written and itemised after an on-site walkthrough — so you see exactly what you’re paying for.

Call (774) 512-3176

How It Works

Our Siding Installation Process

Simple, transparent, and stress-free from first call to final walkthrough.

Free Consultation

Call us or fill out our form. We’ll discuss your project needs and schedule a site visit at your convenience.

Detailed Estimate

We provide a comprehensive written estimate with transparent pricing. No hidden fees, no surprises.

Expert Construction

Our skilled team executes your project with precision, keeping you informed every step of the way.

Final Walkthrough

We walk through the completed project together, ensuring everything meets your expectations.

Portfolio

Recent Siding Installation Projects

Swipe to see more →

Answers

Siding Installation in Arlington — FAQ

For a job that lasts, usually yes. Tear-off is the only way to inspect the sheathing, fix hidden rot, and install a proper drainage plane. Siding installed over failing material traps moisture and hides the problem instead of solving it.

Testimonials

What Arlington Homeowners Say

5 out of 5 from 27 reviews on our Google Business Profile.

“Roger and his team are professional, thorough, and very hardworking. They finished the job on time with quality craftsmanship.”

— Matt SmithJuly 2026

“Very good and hard workers!!!”

— Helton RodriguesJune 2026

Loading…

Permitting & Code in Arlington

Arlington Building Department

Inspectional Services

51 Grove Street, Floor 1, Arlington, MA 02476
(781) 316-3390
Online permit portal

Verified 2026-07-20 · RS Development Group pulls permits on your behalf.

Permit fee in Arlington: $20 per $1,000 of estimated cost of work (1-2 family), minimum fee $50 (source)

Setbacks — R1 Single-Family (R0/R1 row, Zoning Bylaw 5.4.2)

Front 25 ft · side 10 ft. Setbacks are set by zoning district, so confirm which district your lot is in before siting an addition or deck — we check it as part of the estimate.

Arlington has a local historic district

If your home falls inside it, exterior changes — siding, windows, roofing material, additions visible from the street — need Historic District Commission review before the building permit issues. That review adds time, so we file it early rather than discovering it mid-project. Commission details.

Rogerio Alves

Founder & Lead Contractor

Call (774) 512-3176

About RS Development Group

A Marlborough Contractor Built on Structural Expertise

Founded in 2008 by Rogerio Alves, RS Development Group has grown from a specialist framing crew into a full-service general contractor serving 109 cities and towns across Massachusetts. We're proud to bring that same craftsmanship to Arlington and the Greater Boston area.

What sets us apart is where we started: structural framing. Because we understand how a home is built from the skeleton out, every roof, addition, deck, siding job, and remodel we take on is handled with a structural awareness most contractors simply don’t have — which means fewer surprises, cleaner tie-ins, and work that lasts.

We’re fully licensed (MA HIC #216507) and insured, and we back every job with honest, written pricing and a schedule we keep. That’s how we’ve earned a perfect 5-star rating from 27 homeowners across the region.

Fully licensed — MA HIC #216507
General liability & workers’ compensation insured
Family-owned and operated since 2008
Perfect 5-star rating across 27 verified reviews
Free, written, itemized estimates — no surprises
Every project built to code and finished on schedule

Since 2008

Serving Massachusetts

5★

27 Verified Reviews

109

Massachusetts Cities & Towns Served

Licensed

MA HIC #216507

Other Services in Arlington

Framing Services General Contractor Deck Construction Home Remodeling Roofing Services Home Additions

Siding Installation Near Arlington

Stoneham, MA Woburn, MA Winchester, MA Belmont, MA Watertown, MA Quincy, MA

Get Your Free Siding Installation Estimate in Arlington

Licensed, insured, and 5-star rated. No obligation.

Call (774) 512-3176 Free Estimate — No Obligation